specification | name | UNIT | QTY | Unit price（USD） | Remark |
YV5B | a | 7 | 12500 | Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Electric trolley，double track length 9000mm，use medium plate welding. | |
DXC | Electric trolley | a | 14 | 2200 | |
JZJ | Automatic splicer | a | 7 | 22000 | Automatic splicer keep corrugating cardboard assembly line uninterrupted work，Reduce paper consumption，Greatly improve productivity.Maximum speed200m/min |
ZJ-V5B hydraulic shaftless mill roll stand
※structural feature：
★adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others，the lifting of the paper adopts hydraulic drive.
★brake adjustable adopts multipoint braking system.
★every stand matched two sets paper car , and they can paper on the both sides at the same time.
USAGE Of Hydraulic mill roll stand
The ZJ type shaftless paper holder is one of the main equipment for producing corrugated cardboard on corrugated cardboard production lines
(or single-sided corrugated cardboard production lines), used to support the roll paper (face paper and core paper) used for producing corrugated cardboard.
This machine adopts electric clamping method to adjust the width specifications of the supported roll paper web, and uses different tension control configurations
to control the tension of the corrugated raw paper conveying, ensuring that the corrugated raw paper smoothly enters the next process and achieves
the goal of efficient production of corrugated cardboard.
This machine can only be used as a raw paper support equipment on the corrugated cardboard production line. If the machine is used for other purposes
and causes losses, the consequences shall be borne by the user
※technical parameters：
1、the range of clamping paper：MAX2200mm MIN1000mm 2、clamping diameters：MAX￠1500mm MIN￠350mm
3、main shaft diameter of paper holder：￠240mm 4、gas source work pressure（Mpa）：0.4---0.8Mpa
5、equipment size：Lmx4.3*Wmx1.8*Hmx1.6 6、single weight：MAX4000Kg
※Hydraulic system parameters：
1、Work pressure（Mpa）:16---18Mpa 2、lifting hydraulic cylinder：￠100×440mm
3、Clamping hydraulic cylinder：￠63×1300m 4、hydraulic station motor power：3KW --380V -- 50Hz
5、solenoid valve voltage：220V 50 Hz
※Mainly purchased parts, raw materials and origin：
Name of main parts | Brands or place of origin | material |
Main shaft | Day steel production | diameter242mm |
Swing arm | Production by own | Resin sand gray ironHT200 |
wallboard | Jigang prduction | Q235AWelding parts |
bearing | HRB,ZWZ,LYC | |
expand chuck | Zhejiang xusheng | 3、4inch shared |
Main electrical appliance | France Schneider | |
button | CHINT NP2series | |
Air switch | French Schneider | |
Pneumatic components | Zhejiang Sonor CSM | |
Hydraulic station | Shandong zaozhuang | |
Brake pump | zhejiang |
※ electric paper trolley, track
※structural feature：
★ automatic roll up and down. Electric push place.
★ track buried whole, the main frame of the 18th channel, beam and ¢ 20mm drawing bar welding, rail length 9000mm.
★ Each paper Paper holder with both the car from both sides of the paper simultaneously.
※Mainly purchased parts, raw materials and origin：
Name of main parts | Brands or place of origin | material |
track and paper trolley | NO16channel steel、Q235A、steel strip | |
bearing | HRB,ZWZ,LYC |
